To buy, select Size
Choose from options to the left

DPP Titanium Rear Sight Dovetail Mount/Mounting Plate/Adapter Compatible with Glock Vortex Venom & Viper, Burris Fastfire, Docter

4.5 4.5 out of 5 stars 1,634 ratings
Price: $36.89 Free Return on some sizes and colors

Brand DPP Titanium
Color Black
Compatible Devices Glock NON MOS
Compatible Phone Models Glock NON MOS
Mounting Type Dovetail Mount

About this item

  • Version 3 modified the dovetail to make it more sturdy and easy to install
  • Precision CNC Machined from 6AL4V aerospace grade Titanium with black PVD finish.
  • 30MOA design, Solved some red dots don't have enough elevation adjustment to put the sight down on pistol mount.
  • Ultra Low Profile and lightweight, Easy to install.One Piece Design for a Secure Zero Hold.
  • 100% MONEY-BACK warranty within 30 days of purchase * NO QUESTIONS ASKED. 7X24 quick response technical support.LIFETIME WARRANTY

Product Description

DPP Titanium Rear Sight Mount/Plate/Adapter Compatible with Glock models

GL-01TI

It has one of the lowest bore axes in the industry without any alterations on your pistol. Remove the rear sight on your gun and replace it with our mount in order to mount your Red Dot Sight. You can take our mount off and replace your rear sight at any time. Installation hardware and tools included. 0.13" saddle height. One-Piece Design, Lightweight but strong. This provides a steady sturdy and rugged mount that will hold your zero.

Compatible with:

GL-01TI

Compatible Red Dot Sights

Mounting Screws INCLUDED
  • Vortex Viper / Venom
  • Burris Fast Fire 2 / 3
  • Doctor
  • ADE RD3-006, 009, 012, 013, 015
  • UTG Reflex Micro Dot
  • TRUGLO TRU-TEC Micro Red Dot Sight
Does NOT compatible

  1. Meopta Meosight III
  2. Delta OpticalMiniDot HD25 and any copycat sight

Compatible with Glock models

9mm model: 17 19 26 34 43 45 48

.380 model: 42

.357 model: 31 32 33

.40 model: 22 23 24 27 35

.45 Auto model:21 30 36 41

.45 G.A.Pmodel: 37 38 39

10mm AUTOmodel: 20 29

Not fit all mos model
GL-01TI GL-01AL XD-01AL MP-01AL 75-01AL GL-03TI
GL-01TI GL-01AL XD-01AL MP-01AL 75-01AL GL-03TI
Customer Reviews
4.5 out of 5 stars
1,634
4.5 out of 5 stars
1,634
4.3 out of 5 stars
425
4.3 out of 5 stars
225
4.3 out of 5 stars
64
4.5 out of 5 stars
629
Price $36.89 $20.89 $22.89 $22.89 $22.89 $36.89
Compatible models Glock Glock Springfield XD Smith Wesson MP CZ 75/85 Glock
Compatible Footprint Venom/Viper/Fastfire Venom/Viper/Fastfire Venom/Viper/Fastfire Venom/Viper/Fastfire Venom/Viper/Fastfire Shield RMS/Holosun 507K
Material Titanium Aluminum Aluminum Aluminum Aluminum Titanium

Product information

Technical Details

Additional Information

Looking for specific info?

Customer reviews

4.5 out of 5 stars
4.5 out of 5
1,634 global ratings

Customers say

Customers like the screws, performance, value, appearance and quality of the aiming scope sight. They mention that it comes with more than enough screws, works great, is good value for the money and that the one piece design is nice.

AI-generated from the text of customer reviews

87 customers mention79 positive8 negative

Customers are satisfied with the quality of the aiming scope sight. They mention that it is well built, high quality, and secure. Some say that the mounting plate is strong and easy to install. Overall, customers are happy with the product's quality and functionality.

"...I shot 34 rounds through it and it held tight. I can bet that it ain’t going anywhere...." Read more

"It's perfect. Comes with more than enough screws, so finding the correct ones are easy...." Read more

"Well finished, good fit." Read more

"...Installed easily with the tools I have on hand, very secure and I would highly recommend." Read more

73 customers mention58 positive15 negative

Customers like the fit of the aiming scope sight. They mention that it fits very well, has no play or movement, and has stayed tight and true. Some say that the mount fits their Vortex Venom perfectly.

"Installed easily taking out the rear sight. Perfect fit for vortex viper" Read more

"Well finished, good fit." Read more

"...n't fit my Canik but it did, it does replace your rear-sight but fits nicely. I can confirm it's compatible with a Vortex Venom red dot sight." Read more

"It fits great on my Block 27 with my ADE Red Dot" Read more

46 customers mention37 positive9 negative

Customers find the installation of the aiming scope sight to be easy. They mention that it is simple to mount and works great for their lazer.

"Installed easily taking out the rear sight. Perfect fit for vortex viper" Read more

"...Installed easily with the tools I have on hand, very secure and I would highly recommend." Read more

"This fit my Glock 19 and was very easy to install." Read more

"...All in all this feels like a quality product. It was easy to install with my cheap Amazon sight pusher...." Read more

28 customers mention25 positive3 negative

Customers like the performance of the aiming scope sight. They mention that it works great, it holds zero well, and it works with other sights. Some say that the red dot works great and that it's easy to mount.

"Works perfectly" Read more

"This mount, unlike the one for the RMR footprint, works very well...." Read more

"Works great on my custom Glock19 build. Hold zero great. Nice tight fit to the slide which you want...." Read more

"This base plate worked perfectly with my Glock 19, 9mm. I was a little skeptical about fitment but the plate installed nicely...." Read more

21 customers mention21 positive0 negative

Customers are satisfied with the look and feel of the aiming scope sight. They mention that it looks good, has a one-piece design, and is well-machined. Some appreciate the red dot dove tail plate and the great finish. Overall, most are happy with the appearance and functionality of the product.

"I have two of these. I highly recommend them.Pros: One piece design. Secure fit in the dovetail of Glocks...." Read more

"...Having now seen it in person, I'm very satisfied with the look and feel. Feels pretty much like a 1/3 cowitness would on a MOS...." Read more

"This is a beautifully machined and finished product. The red dot fits perfectly with no play or movement. Quality product from a great company." Read more

"The plate is great it matched up on my aborted Venom perfectly. Now the install was another thing...." Read more

20 customers mention16 positive4 negative

Customers like the value of the aiming scope sight. They mention it's a great product for the money, with great quality. Some say it'll make an affordable switch to red dots without paying for milling.

"Great fit on Glock 20, Low mount for reflex sight, well built, worth the price" Read more

"...Great quality for the price compared to glock whic is double or more in price and not made out of titanium." Read more

"...Then I found this one from DPP titanium. This is a great affordable product. Don't waste your money on the other guys...." Read more

"Ended up returning and buying a slide. It’s not worth the cheap option. If you want an optic, either get your slide milled or buy a new slide." Read more

11 customers mention11 positive0 negative

Customers are satisfied with the screws of the aiming scope sight. They mention that it comes with more than enough screws with lock-tite on them. They also say that the package comes with all required hardware.

"...The kit comes with all of the mounting screws that will fit several different sights. The Burris screws tightened my Crimson Trace down just right...." Read more

"It's perfect. Comes with more than enough screws, so finding the correct ones are easy...." Read more

"...This one is sturdy and well made. Comes with about 5 sets of screws for different brands of red dots...." Read more

"...Came out perfect no scratches. comes with multiple screws to try. I recommend using loctite on the screws. Perfect fit!" Read more

14 customers mention7 positive7 negative

Customers have mixed opinions about the profile of the aiming scope sight. Some mention that it has a fairly low profile, while others say that it adds a little height to their optic. Some say that the installation was easy, while other say that they were unable to zero the sight.

"...isn’t as obtrusive as most dovetail mounts I’ve seen and has a relatively low profile...." Read more

"...The sight does sit a little higher than if you did have it milled but the ability to go from gun to gun, if you wanted to, makes this mount an..." Read more

"...It has a fairly low profile, so that's a plus. I used a rubber hammer and nail punch to drive the plate into the dovetail...." Read more

"It does exactly what it supposed too.It sets the optic higher than I would like. If your slide isn’t cut you don’t have a lot of options." Read more

Works great
5 Stars
Works great
It fits great on my Block 27 with my ADE Red Dot
Hide
Thank you for your feedback
Sorry, there was an error
Sorry we couldn't load the review

Top reviews from the United States

Chieflawdawg
5.0 out of 5 stars Tight fit. Sturdy. Good value for the money.
Reviewed in the United States on March 12, 2021
Material Type: AluminumSize: Black Anodizing FinishVerified Purchase
I originally planned on returning this item because I was having trouble getting in on my gun. It was so tight fitting that I was afraid that I might damage it or the slide while trying to install it. I tried putting it on my Glock 26, 32 and 34. All had the same issue. It would go in about 1/3 of the way and then it didn’t want to go any further. I watched a YouTube video and read several reviews and all said that you had to beat it in pretty hard to get it to seat. I wrapped the slide up really good and put a small wooden block on the side of the mount and used a heavy hammer to beat it in. And I mean beat it in. It took several hard whacks to finally get it all of the way in. I even put a drop of oil in the dovetail channel before I started thinking that it might help. It centered up well and I mounted a Crimson Trace cts-1300 on it. I shot 34 rounds through it and it held tight. I can bet that it ain’t going anywhere. My only concern is if I ever want to take it off, how hard will that be? It is too wide to use a traditional sight pusher so I guess I will have to use a copper punch and hammer.

The kit comes with all of the mounting screws that will fit several different sights. The Burris screws tightened my Crimson Trace down just right. Screws already have blue Locktite on them. I went ahead and ordered another one that will accommodate the rmr/ Holosun type since I think that I want to put one of them on another Glock. This is the best option if your gun is not MOS ready and you don’t want to spend $150 to get your slide milled. The sight does sit a little higher than if you did have it milled but the ability to go from gun to gun, if you wanted to, makes this mount an economical choice. I am happy with it so far.
Customer image
Chieflawdawg
5.0 out of 5 stars Tight fit. Sturdy. Good value for the money.
Reviewed in the United States on March 12, 2021
I originally planned on returning this item because I was having trouble getting in on my gun. It was so tight fitting that I was afraid that I might damage it or the slide while trying to install it. I tried putting it on my Glock 26, 32 and 34. All had the same issue. It would go in about 1/3 of the way and then it didn’t want to go any further. I watched a YouTube video and read several reviews and all said that you had to beat it in pretty hard to get it to seat. I wrapped the slide up really good and put a small wooden block on the side of the mount and used a heavy hammer to beat it in. And I mean beat it in. It took several hard whacks to finally get it all of the way in. I even put a drop of oil in the dovetail channel before I started thinking that it might help. It centered up well and I mounted a Crimson Trace cts-1300 on it. I shot 34 rounds through it and it held tight. I can bet that it ain’t going anywhere. My only concern is if I ever want to take it off, how hard will that be? It is too wide to use a traditional sight pusher so I guess I will have to use a copper punch and hammer.

The kit comes with all of the mounting screws that will fit several different sights. The Burris screws tightened my Crimson Trace down just right. Screws already have blue Locktite on them. I went ahead and ordered another one that will accommodate the rmr/ Holosun type since I think that I want to put one of them on another Glock. This is the best option if your gun is not MOS ready and you don’t want to spend $150 to get your slide milled. The sight does sit a little higher than if you did have it milled but the ability to go from gun to gun, if you wanted to, makes this mount an economical choice. I am happy with it so far.
Images in this review
Customer image Customer image
Customer imageCustomer image
24 people found this helpful
Helpful
 Report
Very nice!
5.0 out of 5 stars Mounting plate
Reviewed in the United States on April 25, 2024
Material Type: AluminumSize: Black Anodizing FinishVerified Purchase
It's perfect. Comes with more than enough screws, so finding the correct ones are easy. It's a bit snug to attach, but it needs to be, so it won't shift when you fire your gun.
Helpful
 Report
BJC
5.0 out of 5 stars Easy install glock 19 gen 4
Reviewed in the United States on March 22, 2024
Material Type: AluminumSize: Black Anodizing FinishVerified Purchase
Installed easily taking out the rear sight. Perfect fit for vortex viper
Helpful
 Report
angie
4.0 out of 5 stars Nice plates
Reviewed in the United States on November 29, 2023
Material Type: AluminumSize: Black Anodizing FinishVerified Purchase
Well finished, good fit.
Helpful
 Report
scott murphy
5.0 out of 5 stars Works great
Reviewed in the United States on January 14, 2024
Material Type: 6AL4V TitaniumSize: PVD Black FinishVerified Purchase
Wanted to add a red dot to complete in a contest at my local gun club. Installed easily with the tools I have on hand, very secure and I would highly recommend.
Helpful
 Report
JKB
5.0 out of 5 stars Perfect!
Reviewed in the United States on January 14, 2024
Material Type: 6AL4V TitaniumSize: PVD Black FinishVerified Purchase
Worked perfect for mounting my Vortex Venom red dot. This titanium base is the way to go for heavy duty use (avoid aluminum base if you want repeatable POI). Sight in was super easy and accuracy has maintained after several shots.
Helpful
 Report
bozo the clown is destroying capitalism
3.0 out of 5 stars It fit
Reviewed in the United States on October 5, 2023
Material Type: AluminumSize: Black Anodizing FinishVerified Purchase
It does fit the g21 2st gen. The hard part was finding a dot that fit the mount because I wasn't going to spend upwards of $300 on a red dot for a pistol. I did find one that fit other than the ones listed on the ad for around $60 from ADE. My next concern was the violence a pistol barrel experiences knocking the dot off mark. So far (less than 300 rnds) that hasn't happened .... Yet
3 people found this helpful
Helpful
 Report
michael
5.0 out of 5 stars Fits Canik TP9-SF-Elite.
Reviewed in the United States on April 4, 2024
Material Type: AluminumSize: Type III Black Hard Anodizing FinishVerified Purchase
I was worried this wouldn't fit my Canik but it did, it does replace your rear-sight but fits nicely. I can confirm it's compatible with a Vortex Venom red dot sight.
Helpful
 Report